For Better Performance Please Use Chrome or Firefox Web Browser

Publications

 

ISI Journal Papers

  1. Kariminia, A., Nili-Ahmadabadi, M. and Kim, K. C., “Full Three-Dimensional Inverse Design Method for S-Ducts Using a New Dimensionless Flow Parameter”, Applied Sciences, 2021.
  2. Minaeian, A., Nili-Ahmadabadi, M., Norouzi, M. and Kim, K. C., “Effects of Elasticity on Unsteady Forced Convective Heat Transfer of Viscoelastic Fluid around a Cylinder in the Presence of Viscous Dissipation”, Physics of Fluids, 32 (083102), 2020.
  3. Shahsavari, A., Nili-Ahmadabadi, M., Shirani, E. and Kim, K. C., “Design of an axial transonic rotor by modified span-wise loading distribution”, Journal of Applied Fluid Mechanics, 14 (1), 2021.
  4. Nili Ahmadabadi, M., Cho, D. S. and Kim, K. C., “Design of a Novel Vortex-Based Feedback Fluidic Oscillator with Numerical Evaluation”, Engineering Application of Computational Fluid Mechanics, Vol. 14, No. 1, pp. 1302-1324, 2020.
  5. Ansari, A, Nili-Ahmadabadi, M, Tavakoli, M. R. and Minaeian, A, “Experimental study of the effects of a vertical channel on the natural convection of a horizontal cylinder”, Thermal Science, In Press, 2020.
  6. Shahsavari, A., Nili-Ahmadabadi, M., “A novel approach for the design of axial flow fan by increasing by-pass ratio in a constant-diameter turbofan”, Propulsion and Power Research, Vol. 9, No. 2, pp. 142-158, 2020.
  7. Nematollahi, O., Samsam-Khayani, H., Nili-Ahmadabadi, M., Yoon, S. Y. and Kim, KC., “A Novel Self-Seeding Method for Particle Image Velocimetry Measurements of Subsonic and Supersonic Flows”, Scientific reports, (2020) 10:10834.
  8. Mohammadshahi, S., Samsam-Khayani, H., Nili Ahmadabadi, M. and Kim, K. C., “Vortex-induced vibration characteristics and heat transfer mechanism of an oscillating plate attached to a cylinder in a constant-temperature channel”, Heat Transfer Research 51(3), 2020
  9. Minaeian, A., Nili-Ahmadabadi, M. and Norouzi, M., “Forced convective heat transfer of nonlinear viscoelastic flows over a circular cylinder at low Reynolds inertia regime”, Communications in Nonlinear Science and Numerical Simulation 83, 105134, 2020.
  10. Nematollahi, O., Nili-Ahmadabadi, M. and Kim, K. C., The influence of cubic real-gas equations of state in the supersonic regime of dense gases, Journal of Mechanical Science and Technology, 34, 1581-1589, 2020.
  11. Nili-Ahmadabadi, M., Nematollahi, O., Fatehi, M, Cho, D. and Kim, K. C., “Evaluation of aerodynamic performance enhancement of Risø_B1 airfoil with an optimized cavity by PIV measurement”, Journal of Visualization, DOI: 10.1007/s12650-020-00658-7, 2020.
  12. Khodabakhshian, H., Nili-Ahmadabadi, M., and Kim, K. C., “An experimental study on the effect of a novel nature-inspired 3D-serrated leading edge on the aerodynamic performance of a double delta wing in the transitional flow regime”, Journal of Mechanical Science and Technology 33 (12), 5913-5921, 2019.
  13. Nasrazadani, S. H., Nili-Ahmadabadi, M. and Noorsalehi, H., “Upgrade and development of elastic surface inverse design method for axial compressor cascade with sharp-edged blades”, Numerical Heat Transfer, Part B: Fundamentals, 1-23, https://doi.org/10.1080/10407790.2019.1667680, 2019.
  14. Minaeian, A., Nili-Ahmadabadi, M. and Norouzi, M. “Numerical study of Phan-Thien–Tanner viscoelastic fluid flow around a two-dimensional circular cylinder at a low Reynolds number: a new classification for drag variations regimes”, Meccanica, 54 (11-12), 1717–1745, 2019.
  15. Nafar-Sefiddashti, M, Nili-Ahmadabadi, M., Saeedi Rizi, B. and Pourhoseini, J, “Visualization of flow over a thick airfoil with circular cross-sectional riblets at low Reynolds numbers”, Journal of Visualization, 22 (5), 877–888, 2019.
  16. Alikhassi, M., Nili-Ahmadabadi, M., Tikani, R. and Karimi, M. H., “A Novel Approach for Energy Harvesting from Feedback Fluidic Oscillator”, International Journal of Precision Engineering and Manufacturing-Green Technology, 6 (4), 769–778, 2019.
  17. Mohammadshahi, S., Tavakoli, M. R. Samsam-Khayani, H., Nili-Ahmadabadi, M. and Kim, K. C. “Investigation of naturally ventilated shavadoons component: Architectural underground pattern on ventilation”, Tunneling and Underground Space Technology, 19, doi.org/10.1016/j.tust.2019.05.020, 2019
  18. Nematollahi, O., Nili-Ahmadabadi, M., Seo, H. and Kim, K. C., “Effect of acicular vortex generators on the aerodynamic features of a slender delta wing”, Aerospace Science and Technology, 86, 327-340, 2019.
  19. Fallah Ardeshir, H., Ehghaghi, B. and Nili-Ahmadabadi, M., “Inverse Design of a Centrifugal Pump on the Meridional Plane Using Ball-Spine Algorithm”, Scientia Iranica, 2019
  20. Nili-Ahmadabadi, M., Nematollahi, O. and Kim, K. C., “The Effects of Coarse Riblets on Air Flow Structures over a Slender Delta Wing Using Particle Image Velocimetry”, Chinese Journal of Aeronautics,  32 (6), 1367-1379, 2019.
  21. Fatehi, M, Nili-Ahmadabadi, M., Nematollahi, O., A Minaiean and Kim, K. C., “Aerodynamic performance improvement of wind turbine blade by cavity shape optimization”, Renewable Energy, 132, 773-785, 2019.
  22. Samsam-Khayani, H., Tavakoli, M. R., Mohammadshahi, S. and Nili-Ahmadabadi, M., “Numerical study of effects of Shavadoon connections (a vernacular architectural pattern) on improvement of natural ventilation”, Tunnelling and Underground Space Technology, 82, 170-181, 2018.
  23. Sohankar, A., Abbasi, M., Nili-Ahmadabadi, M., Mahbub Alam, MD. and Zafar, M., “Experimental study of the flow around two finite square cylinders”, Arch. Mech., 70, 5, pp. 457–480, 2018.
  24. Mohammadshahi, S., Nili-Ahmadabadi, M., Salimpour, M. and Samsam-Khayani, H., “Numerical study of a vortex-induced vibration technique for passive heat transfer enhancement in internal turbulent flow”, European Journal of Mechanics-B/Fluids 72, 103-113, 2018.
  25. Nili-Ahmadabadi, M., Nematollahi, O., Cho, D. and Kim, K. C., “A numerical comparison between ideal and dense gas flow structures in the supersonic regime for a cascade of wedge-shaped straight plates”, Applied Thermal Engineering 137, 774-783, 2018.
  26. Ghazanfari, B., Nili-Ahmadabadi, M., Torabi-Farsani, A. and Noorsalehi, M., “Numerical study of camber and stagger angle effects on the aerodynamic performance of tandem-blade cascades”, Propulsion and Power Research 7 (1), 30-42, 2018.
  27. Radmanesh, M., Nili-Ahmadabadi, M., Nematollahi, O., Samani, I. and Kim, K. C., “Experimental study of square riblets effects on delta wing using smoke visualization and force measurement”, Journal of Visualization, 21 (3), 421-432, 2018, DOI: 10.1007/s12650-018-0472-8, 2018.
  28. Nafar Sefiddashti, M., Nili-Ahmadabadi, M. and Saeedi Rizi, B., “Experimental study of effects of circular-cross-section riblets on the aerodynamic performance of Risø airfoil at transient flow regime”, Journal of Mechanical Science and Technology, Vol. 32, No. 2, pp: 709-716, 2018.
  29. Saeedi Rizi, B., Nili-Ahmadabadi, M., Nafar Sefiddashti, M. and Khodabakhshian Naeini, H. “Experimental study of riblet effects on the aerodynamic performance and flow characteristics of a delta wing”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 0954410017748989, 2017.
  30. Shahsavari, A. and Nili-Ahmadabadi, M., “Investigation of an innovative non-free vortex aerodynamic procedure to design a single-stage transonic compressor”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 0954410017710272, 2017.
  31. Taherian, G. H., Nili-Ahmadabadi, M., Karimi, M. H. and Tavakoli M. R., "Flow visualization over a thick blunt trailing-edge airfoil with base cavity at low Reynolds numbers using PIV technique", Journal of Visualization, DOI: 10.1007/s12650-016-0405-3, Vol. 20, No. 4, pp. 695–710, 2017.
  32. Mayeli, P., Nili-Ahmadabadi, M., Pirzadeh, M. R. and Rahmani, P., “Determination of desired geometry by a novel extension of ball spine algorithm inverse method to conjugate heat transfer problems”, Computers & Fluids, Vol. 154, pp. 390-406, 2017.
  33. Karbasipour, M., Nili-Ahmadabadi, M., Taherian, G. H. and Minaean, A., "Experimental Study of Natural Convective Flow over a Hot Horizontal Rhombus Cylinder Immersed in Water via PIV Technique", Journal Applied Fluid Mechanics, Vol. 10, No. 2, pp. 735-747, 2017.
  34. Zaghian, R., Tavakoli, M. R., Karbasipour, M. and Nili-Ahmadabadi, M., “Experimental study of flow structures of a solitary wave propagating over a submerged thin plate in different angles using PIV technique”, International Journal of Heat and Fluid Flow, Vol. 66, pp. 18-26, 2017.
  35. Shoomal, M., Nili-Ahmadabadi, M. and Shirani, M., "Development of the Ball-Spine Inverse Design Algorithm to Swirling Viscous Flow for Performance Improvement of an Axisymmetric Bend Duct", Aerospace Science and Technology, Vol. 52, pp. 181–188, 2016.
  36. Moradi Cheqamahi, J., Nili-Ahmadabadi, M., Akbarzadeh, S. and Saghafian, M., "Numerical analysis of turbocharger’s bearing using dynamic mesh", Journal of Applied Fluid Mechanics, Journal of Applied Fluid Mechanics, Vol. 9, No.5, pp. 2545-2557, 2016.
  37. Hoghooghi, H., Nili-Ahmadabadi, M. and Dehghan Manshadi, M. "Optimization of a Subsonic Wind Tunnel Nozzle with Low Contraction Ratio via Ball-Spine Inverse Design Method", Journal of Mechanical Science and Technology, Vol. 30, No. 5, pp. 2059-2067, 2016.
  38. Mayeli, M., Nili-Ahmadabadi, M. and Besharati-Foumania, H. "Inverse shape design for heat conduction problems via the ball spine algorithm", Numerical Heat Transfer, Part B, Vol. 69, No. 3, 2016.
  39. Kazemi, S. A., Nili-Ahmadabadi, M., Sedaghat, A. and Saghafian, M. "Aerodynamic Performance of a Circulating Airfoil Section for Magnus Systems via Numerical Simulation and Flow Visualization", Energy, Vol. 104, pp. 1-15, 2016.
  40. Mohammadshahi, S., Nili-Ahmadabadi, M. and Nematollahi, O., "Improvement of ventilation and heat transfer in Shavadoon via numerical simulation: A traditional HVAC system", Renewable Energy, Vol. 96, pp. 295-304, 2016.
  41. Madadi, A., Kermani, M. J. and Nili-Ahmadabadi, M., "Three-Dimensional Design of Axial Flow Compressor Blades Using the Ball-Spine Algorithm", Journal of Applied Fluid Mechanics, Vol. 8, No. 4, pp. 683-691, 2015.
  42. Nili-Ahmadabadi, M., Durali, M., and Hajilouy, A., "A Novel aerodynamic Design Method for Centrifugal Compressor", Journal of Applied Fluid Mechanics, Vol. 7, No. 2, pp. 329-344, 2014.
  43. Radmanesh, M., Nematollahi, O., Nili-Ahmadabadi, M.,  and Hassanalian, M., "A Novel Strategy for Designing and Manufacturing a Fixed Wing MAV for the Purpose of Increasing Maneuverability and Stability in Longitudinal Axis", Journal of Applied Fluid Mechanics, Vol. 7, No. 3, pp. 435-446, 2014.
  44. Madadi, A., Kermani, M. J. and Nili-Ahmadabadi, M., "Application of the Ball-Spine Algorithm to Design Axial-Flow Compressor Blade", Scientia Iranica B, Vol. 21, No. 6, 2014.
  45. Safari, M., Nili-Ahmadabadi, M., Ghaei, A. and Shirani, E., "Inverse design in subsonic and transonic external flow regimes using Elastic Surface Algorithm", Computer & Fluids, Vol. 102, pp. 41-51, 2014.
  46. Madadi, A., Kermani, M. J. and Nili-Ahmadabadi, M., "Aerodynamic Design of S-Shaped Diffusers Using Ball–Spine Inverse Design Method", J. Eng. Gas Turbines Power, Vol. 136, No.12, 122606, 2014.
  47. Madadi, A., Kermani, M. J. and Nili-Ahmadabadi, M., "Applying the ball-spine algorithm to the design of blunt leading edge airfoils for axial flow compressors", Journal of Mechanical Science and Technology, Vol. 28, No.11, pp. 4517-4526, 2014.
  48. Nili-Ahmadabadi, M. and Poursadegh, F., "Centrifugal compressor shape modification using a proposed inverse design method", Journal of Mechanical Science & Technology, Vol. 27, No. 3, pp.1-8, 2013.
  49. Nili-Ahmadabadi, M. and Poursadegh, F.,"Optimization of a seven-stage centrifugal compressor by using a quasi-3D inverse design method", Journal of Mechanical Science & Technology, Vol. 27, No.11, pp.1-12, 2013.
  50. Nili-Ahmadabadi, M., and Mohammadi, M., "Subsonic and transonic airfoil inverse design via Ball-Spine Algorithm", Computer & Fluids, Vol. 84, pp. 87-96, 2013.
  51. Nili-Ahmadabadi, M. and Karrabi, H., “Heat Transfer and Flow Region Characteristics Study in a Non- Annular Channel between Rotor and Stator”, Thermal Science Journal, Vol. 16, No. 2, pp. 593-603, 2012.
  52. Nili-Ahmadabadi, M., Durali, M., Hajilouy, A., "Duct Design in Subsonic and Supersonic Flow Regimes with and without Normal Shock Waves Using Flexible String Algorithm", ScientiaIranica Journal, Vol. 17, No. 3, pp. 179-193, 2010.
  53. Nili-Ahmadabadi, M., Hajilouy, A., and Durali, M., "A Novel 2-D Incompressible Viscous Inverse Design Method for Internal Flows Using Flexible String Algorithm", Journal of Fluids Engineering ASME, Vol. 132 / 031401-1-9, 2010.
  54. Nili-Ahmadabadi, M., Mahdavifar, S.J.E. and Hashemi, A., "Experimental Study of Parameters Affecting the Nusselt Number of Generator Rotor and Stator", Heat Transfer Engineering Journal, Taylor & Francis, Vol. 31, No. 3, pp: 1-7, 2010.
  55. Nili-Ahmadabadi, M., Durali, M., Hajilouy, A., "Inverse Design of 2D Subsonic Ducts Using Flexible String Algorithm", Inverse Problems in Science and Engineering, Vol. 17, No. 8, pp. 1037-1057, 2009.
  56. Nili-Ahmadabadi, M., Hajilouy, A. and Durali, M., "Investigation of a centrifugal compressor and study of the area ratio and tip clearance effects on performance", Journal of Thermal Science, Vol. 17, No. 4, pp. 314-323, 2008.

 

 

 

ISC Journal Papers

    1.  
  2. Karbasipour, M., Nili-Ahmadabadi, M., Zaghian, R. and Tavakoli, M. R., “Experimental Investigation of Flow Structure of Passing Solitary Wave over A Rectangular Obstacle using PIV Techniques”, Journal of Tabriz University Mechanical Engineering, In Press, 2018.
  3. Talebi, S., Fallah Ardeshir, H., Ehghaghi, M. B. and Nili-Ahmadabadi, M., “Inverse Design of Meridional Flow Passage Shape of Centrifugal Pump Impeller Using Ball-Spine Algorithm”, Modares Journal of Mechanics Engineering, Vol. 16, No. 12, pp. 259-268, 2017.
  4. Mokhtarinia, A., Nili Ahmadabadi, M. and Shirani, M., “Performance Improvement of a Wind Turbine Blade using a Developed Inverse Design Method”, energy equipment and systems, Vol. 4, No. 1, pp. 1-10, 2016.
  5. Zaghian, R., Tavakoli, M. R., Karbasipour, M. and Nili-Ahmadabadi, M., “Two Dimensional Investigation of Solitary Wave passing over a Submeged Vertical Thin Plate with PIV Technique”, Modares Journal of Mechanics Engineering, Vol. 16, No. 5, pp. 357-366, 2016.
  6. Torabi, A., Shirani, E., Nili-Ahmadabadi, M. and Alafzade, M. "Combine lattice Boltzmann and Finite Volume methods for simulating blood flow and LDL concentration in vessel", Modares Journal of Mechanics Engineering, Vol. 15, No. 11, pp. 253-262, 2016.
  7. Maleki, H. and Nili-Ahmadabadi, M., “One-dimensional design of centrifugal compressor of a turbo-shaft engine with optimization of 90-degree bend duct between radial and axial diffuser”, Journal of Solid & Fluid Mechanics, Vol. 5, No. 3, pp-65-77, 2016.
  8. Shoomal, M., Nili-Ahmadabadi, M. and Shirani, M., "Inverse Design of 90-Degree Bend between Radial and Axial Diffuser of a Centrifugal Compressor", Modares Journal of Mechanics Engineering, Vol. 15, No. 8, pp. 371-378, 2015.
  9. Hoghoughi, H., M., Nili-Ahmadabadi, M. and Dehghan Manshadi, M., "Application of Honeycomb and Screens in Enhancement of Flow Characteristics in a Subsonic Wind Tunnel", Journal of Tabriz University Mechanical Engineering, Vol. 45, No. 1, pp. 1-10, 2015.
  10. Mokhtarinia, A., Nili Ahmadabadi, M. and Sedaghat, A., "Design of Horizontal Wind Turbine Blade via Blade Element Momentum Method with Its 3D Numerical Solution", Journal of Tabriz University Mechanical Engineering, Vol. 45, No. 2, pp. 43-54. 2015.
  11. NickNezhad, F. and Nili-Ahmadabadi, M., "3D Numerical Simulation of Multi-Stage Compressor of a Turbo-shaft Engine and Its Evaluation of Performance Characteristic", Journal of Tabriz University Mechanical Engineering, Vol. 45, No. 3, pp. 95-106, 2015.
  12. Kazemi, S. A., Nili-Ahmadabadi, M. , Saghafian, M. and sedaghat, A. "Numerical investigation of magnus wind turbine new blade section performance", Modares Journal of Mechanics Engineering, Vol. 15, No. 1, pp-163-172, 2015.
  13. Safari, M., Nili-Ahmadabadi, M., Ghaei, A. and Shirani, E., "Inverse Design ofAirfoil Using Elastic Surface MethodinViscous Subsonic andTransonic Flow", Esteghlal Journal of Engineering, Isfahan Univ. of Tech. , Vol.34, No. 1, pp. 63-77, 2015.
  14. Nili-Ahmadabadi, M., Afshari, A. and Sharafi, A. "Acoustic simulation of closed room using unsteady finite difference method", Journal of Modeling in Engineering, Vol. 12, No. 39, 2014.
  15. Behnia, M., Nili-Ahmadabadi, M. and Saghafian, M., "Performance analysis of the radial flow turbine of a cryogenic with experimental results", Modares Journal of Mechanics Engineering, Vol. 13, No. 14, pp-137-149, 2014.
  16.  M. Mohammadi, M. Nili-Ahmadabadi and Ghadak, F., "Quasi-Three-Dimensional aerodynamic design of S-shaped air intake using inverse design method", The Modares Mechanical Engineering, Vol. 14, No. 4, pp-189-199, 2014.
  17. Taherian, Gh., Nili-Ahmadabadi, M., Zabetian, M. and Karbasipour, M. "Two-dimensional investigation of free convection flow around a heated horizontalcylinder immersed in water using PIV technique", Journal of Solid & Fluid Mechanics, Vol. 4, No. 1, pp-107-117, 2014.
  18. Nili-Ahmadabadi, M. and SamadiVaghefi, N, "Aerodynamic design of axisymmetric diffuser via genetic algorithm and ball spine inverse design method", Journal of Solid & Fluid Mechanics, Vol. 2, No. 4, pp-75-88, 2013.
  19. Madadkon, H., Fadaie, A. and Nili-Ahmadabadi, M., "Experimental and Numerical Investigation of Unsteady Turbulent Flow in a Fluidic Oscillator Flow Meter with Extraction of Characteristics Diagrams", Modares Journal of Mechanics Engineering, Vol. 12, No. 5, pp-30-42, 2012. 
  20. Nili-Ahmadabadi, M. and Poursadegh, F., "Performance Improvement of a Centrifugal Compressor Using a Developed 3D Inverse Design Method", The Modares Mechanical Engineering, Vol. 12, No. 2, pp-109-124, July 2012.
  21. Jafari, M., Nili-Ahmadabadi, M. and Poursadegh, F., "Parametric Study & Performance Improvement of Centrifugal Compressor Impeller of a Turbo-Shaft Engine Using 3D Numerical Simulation", Journal of Solid & Fluid Mechanics, Vol. 2, No. 2, pp. 55-68, 2012.
  22. Behnia, M. and Nili-Ahmadabadi, M., "One-dimensional design of a three-stage axial compressor with its 3D numerical simulation", Journal of Solid & Fluid Mechanics, Vol. 2, No. 3, pp. 9-17, 2012.
  23. Nili-Ahmadabadi, M.,Roshani and M, Rabiee, A.,"One Dimensional Design of Single, Two and Three-Stage Ejector of a Supersonic Wind Tunnel", Journal of Solid & Fluid Mechanics, Vol. 1, No. 2, pp. 57-68, Feb 2012.
  24. Nili-Ahmadabadi, M., Mohammadi, M. and Nejati, A., "2-D Aerodynamic Design of S-shaped Air Intake", Journal of Solid & Fluid Mechanics, Vol. 1, No, 1, pp. 59-69, 2011.
  25. Nili-Ahmadabadi, M., Durali, M. and Hajilouy, A., "A New Method in Inverse Design, Based on Ball-Spine for AxisymmetricDucts with Application in Gas Turbines", Mechanics & Aerospace Journal, Vol. 7, No. 4, pp. 65-75, 2011.
  26. M. Mohammadi, M. Nili-Ahmadabadi and M. R. Shahhosseini, "Design and Analysis of Vaneless Three-dimensional Volutes for Radial Inflow Turbines", Journal of Solid & Fluid Mechanics, Vol. 1, No. 3, pp-155-167, 2011.  
  27. Nouri-Borujerdi, A. and Nili-Ahmadabadi, M., "Nusselt Number Experimental Study of Air Flow Between Rotor and Stator of a Generator", Esteghlal Journal of Engineering, Isfahan Univ. of Tech., Vol. 26, No. 1, pp. 1-11, 2007.

ارتقاء امنیت وب با وف ایرانی